Description:
The Mintion Beagle camera is a dual-purpose camera that allows you to remotely monitor and control your 3D printer while easily creating time-lapse videos. 
Plug and play, multiple ways to play, this is the best gift for 3D printer users.
The camera automatically generates time-lapse videos to make 3D printing more fun, just as the Beagle always seems to find a way to make you laugh.
At the same time, we hope that the Beagleprint camera can become a reliable printing guardian like a beagle; we can observe the printing progress anytime and anywhere, find abnormal temperature and printing problems, and avoid wasting consumables. 

Features:  
1. Stop to save supplies: With the Beagle camera, you can check the status of your prints anytime, anywhere. You can stop printing when a problem occurs, saving supplies and your time. 
2. Make your workflow smoother: No more running back and forth between your computer and printer. Easily upload g-code files for printing through PC browser or APP, making your work more efficient.
3. One-piece design: The camera is one-piece design, no need to assemble, equipped with non-slip pads, the body can be rotated 360 degrees to meet the viewing angle requirements of shooting.
4. Remote monitoring anytime and anywhere: real-time monitoring of printing status. You can also check the temperature, print time, remaining time, and more. You can also adjust delay parameters before printing.
5. Plug and play: Start your Beagleprint in three steps and have more fun. Plug in the data cable, then connect to WiFi, upload the file via PC or APP, and click print. You can monitor and get wonderful time-lapse video.
6. Built-in 32G Micro SD card: The camera comes with a 32G SD card, which can be uploaded and printed through PC or APP. Please note that there is no need to insert the SD card into the printer, otherwise some functions of the camera will be affected.

Specifications:   
Video compression: H.264 
Video resolution: 1080P 
Night version: Yes  
Frame rate: up to 25fps 
Auto time-lapse video: Yes
WiFi connection: Support 2.4GHz 802.11g/n
Compatibility: Most Marlin 3D printers
Upload printable file: Yes, gcode file
Temperature monitor: Yes, for hot end and hot bed
File storage: Micro SD card  

Mintion Beagle camera compatible 3D printers list:
Creality: Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 3 S1/Ender 3 S1 Pro/CR-10/CR-10S/CR-10 V2
Anycubic: i3 Mega S/i3 Mega X/Vyper/Kobra/Kobra Max
Artillery: Sidewinder X1/Sidewinder X2/Genius/Genius Pro
Voxelab/Elegoo: Aquila/Aquila C2/Aquila X2 | Elegoo Neptune/Neptune 2S
Others Printers: Longer LK4 PRO/LK5 PRO | Wanhao D12 230 | Sovol SV01 | Two Tree BLU-5/BLU-3 V2/SP-5/SP-3 | Tevo HYDRA
On Testing 3D Printers List: Prusa Mini+/i3 MK3S+ | Snapmaker A350T/A250T | Creality Ender 5 Series/CR6-SE/CR-10 Series | Bigtree Mainboards
 
Compatible slicer list and other usage tips: 
List of compatible slicers: Ultimaker Cura/Creatity Slicer/Simplify3D/Prusaslicer
About the list of test slicers: Super Slicer, etc.
Firmware and App versions: We will release new Beagle camera firmware and Beagleprint App from time to time
Support information: Please refer to the quick guide booklet that came with the Beagle camera   

Notes:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. 
Please allow slight measurement deviation due to manual measurement. Thank you for your understanding!  

Packing List: 
Beagle camera x 1
Power plug x 1
Type-C data cable x 1
Micro USB cable x 1
Micro SD card x 1 (inserted into camera) 
Reset pin x 1
Quick guide manual x 1